Drywall in Tye Texas by Abilene Drywall: Local Stats, Materials, and Project Facts
Abilene Drywall provides full-service drywall installation, repair, finishing, and texturing in Tye, TX, backed by more than 20 years of hands-on experience and fully licensed and insured crews. From single-room patches to complete commercial buildouts, we handle every stage of the process with in-house professionals rather than subcontracted labor.
Tye sits just west of Abilene along Interstate 20, with a population of roughly 1,200 residents and a housing stock where many homes were built between the 1950s and 1980s. That age range matters for drywall work, because older properties in the area frequently show settling cracks, nail pops, and water damage from Taylor County's swings between drought and heavy storms.
We deliver Level 5 finishes for clients who need smooth, uninterrupted walls, and we keep job sites clean and contained throughout the project. Every estimate is written out clearly before work begins, our schedules are kept, and our workmanship carries a warranty — so you know exactly what you're paying for and what happens if something isn't right.
Why we are the Best Drywall Contractors in Tye Texas?
- 20+ Years of Drywall Expertise
- Flawless Level 5 Finishes
- Clean, Controlled Job Sites
- Clear, Transparent Estimates
- On-Time & Reliable Service
- Skilled In-House Professionals
- Professional Tools & Quality Materials
- Strong Communication
- Fully Licensed & Insured
- Warranty-Backed Workmanship
Licensed & Insured
Serving Since 2005
Get a FREE Quote.
Installation And Repair Services for Tye Properties
We handle new drywall installation for construction and remodels, targeted repairs for damaged walls and ceilings, and commercial interior work across Tye and the surrounding Taylor County area.
Every project runs through our in-house crews, backed by more than 20 years of drywall experience and warranty-supported workmanship.
New Drywall Installation for Homes, Additions, and Remodels
We hang, tape, float, and texture new drywall in room additions, garage conversions, basement finishes, and full-house builds.
Standard residential work uses 1/2-inch board on walls and 5/8-inch on ceilings to limit sagging across 24-inch joist spacing. For bathrooms and laundry rooms, we install moisture-resistant board or cement backer behind tile.
Finish level matters. Most Tye homes get a Level 4 finish under texture, while flat or gloss paint and raking window light call for a Level 5 skim coat — one of our specialties.
Texture options include knockdown, orange peel, hand-troweled, and smooth. We match existing patterns on remodels so new sections blend with the original wall. Estimates list board type, square footage, finish level, and texture before work starts.
Drywall Repair for Cracks, Holes, Water Damage, and Settling
Tye sits on expansive clay soils, and seasonal moisture swings push foundations enough to open seam cracks and corner-bead separation, particularly above doors and windows.
Our repair work covers:
Hairline seam cracks
Re-tape with mesh or paper tape, three-coat feather, texture match
Nail and screw pops
Re-fasten to framing, dimple, spot-finish
Doorknob and furniture holes
Backer strip or hot patch, sand, texture
Roof or plumbing leaks
Cut back to dry framing, replace board, seal and finish
Ceiling stains
Stain-block primer before finishing
We cut out water-damaged board rather than covering it, since gypsum loses strength once saturated.
Job sites stay covered and contained — plastic barriers, floor protection, and vacuum sanding keep dust out of the rest of the house.
Wall Installation and Wall Repair for Commercial Interiors
For offices, retail spaces, restaurants, and warehouses along the I-20 corridor, we frame and finish metal-stud partition walls, demising walls, and drop-ceiling perimeters.
Commercial work often requires specific assemblies. We install Type X fire-rated board for rated corridors and shafts, and sound-rated systems with insulation and resilient channel where privacy is a code or tenant requirement.
Tenant improvements are scheduled around your operating hours. We coordinate with general contractors, electricians, and HVAC trades so inspections aren't delayed by open walls.
Repair calls include forklift damage in warehouses, cart damage in retail, and moisture issues behind commercial fixtures. We're fully licensed and insured, and we provide written scopes so property managers know exactly what's covered.
How to Evaluate Local Drywall Work
Judging drywall quality comes down to three checkpoints: the mechanical soundness of the framing and hanging, the visual consistency of the texture and final finish, and the paperwork and site conduct behind the crew. Below is what we look at on every Tye and Abilene project, and what you should ask any drywall company to demonstrate before work begins.
Framing, Hanging, Taping, Mudding, and Sanding Standards
Good drywall starts before a single sheet goes up. Studs should be plumb within 1/8 inch, spaced 16 or 24 inches on center, and free of crowns that telegraph through the panel.
We hang board perpendicular to framing to cut seam length by roughly 25%, stagger butt joints, and keep fasteners about 1/2 inch from panel edges. Screws should be dimpled, not torn through the paper face.
Taping follows the ASTM C840 sequence: embed coat, fill coat, finish coat, with drying time between each. Our crews sand with 150 to 220 grit and check every seam with a raking work light before calling it done.
Quick inspection checklist:
- Run a hand across each butt joint — you should feel no ridge
- Look for nail pops, paper burns, or exposed screw heads
- Verify corner bead is straight along its full run
- Confirm gaps at floor and ceiling are under 1/4 inch
Texture Matching and Paint-Ready Finish Expectations
Texture is where repairs either disappear or announce themselves. Orange peel, knockdown, splatter, and hand-troweled finishes each require different nozzle pressure, mud thickness, and timing.
Ask any contractor to spray a sample board and hold it against your existing wall in natural light. We do this on every match job rather than guessing at the wall.
The finish level matters just as much. The industry recognizes six levels, and most Tye homeowners need Level 4 for standard walls or Level 5 — a skim coat over the entire surface — for gloss paint, low-angle lighting, or large open rooms.
Level 3
Heavy texture, garages
Level 4
Flat paint, light texture
Level 5
Enamel paint, raking light, accent walls
Paint-ready means primed-and-uniform, not just sanded. Any drywall contractor who skips primer before your topcoat is passing an inconsistency problem to the painter.
Licensing, Insurance, Written Scope, and Jobsite Safety
Texas does not license drywall contractors at the state level, so verification falls to you. Request a certificate of insurance directly from the carrier — general liability plus workers' compensation — and check that coverage dates extend past your project completion.
A written scope should list panel thickness, finish level, texture type, number of coats, and cleanup responsibility. Vague estimates are where disputes start.
We provide transparent written estimates and back our workmanship with a warranty, and we carry full licensing and insurance on every job.
On site, look for dust containment, plastic sheeting over doorways, HEPA vacuums, and daily debris removal. Crews should wear N95 or better respirators during sanding, since joint compound dust contains respirable silica.
Ask whether the crew is in-house or subcontracted. In-house teams — ours included, with more than 20 years of combined drywall experience — tend to produce more consistent results than rotating labor pulled in by general contractors on short notice.
Tye Service Area and Abilene Market Context
Tye sits roughly seven miles west of Abilene along Interstate 20, which places the entire city within a short drive of our crews and material suppliers. That proximity shapes how we schedule jobs, price travel, and coordinate with builders working across Taylor and Jones counties.
Tye ZIP Code 79563 and Access to Abilene-Area Specialists
Tye uses ZIP code 79563, a service area it shares with Merkel and portions of western Taylor County. The city covers about 1.2 square miles and has a population near 1,200 residents, according to census figures.
Because the drive from central Abilene to Tye takes under 15 minutes on I-20, we treat 79563 as part of our core coverage rather than an outlying add-on. There is no travel surcharge built into our estimates for Tye addresses.
That access matters for repair work. A single-room patch, a water-damaged ceiling, or a texture match rarely justifies a long haul, but it fits easily into a same-week schedule when the job site is minutes from our base.
Our estimates for Tye properties are written the same way as any Abilene job: line-itemed materials, labor, and finish level, with no vague allowances.
Abilene Service ZIP Codes 79601, 79602, and 79603
Our Abilene coverage centers on three primary residential ZIP codes, each with its own construction profile:
79601
North and northeast Abilene, older neighborhoods near ACU
Plaster-to-drywall transitions, ceiling repair, texture matching
79602
South and southeast Abilene, including areas near Dyess AFB approach
Remodels, garage conversions, additions
79603
West Abilene, closest to Tye and I-20
New construction hangs, whole-house finishing
79603 is the practical bridge between Tye and the rest of Abilene. Crews working west-side jobs can reach Tye without breaking a workday in half.
Abilene supports a substantial pool of drywall contractors, with local directories listing close to two dozen active companies. We compete in that market on finish quality and communication rather than volume.
Residential, Rural, and Commercial Project Coordination
Work in and around Tye falls into three broad categories, and each requires a different approach to scheduling.
Residential: Single-family homes, manufactured home replacements, and interior remodels. These are typically one- to four-day jobs, and we keep the site swept and dust contained between phases.
Rural: Properties on FM roads outside city limits, including shop buildings, barndominium interiors, and metal-framed structures. We confirm site access and power availability during the estimate visit, since not every rural build has a permanent service drop when drywall goes in.
Commercial: Retail spaces along the I-20 corridor, office buildouts, and light industrial interiors. Here we coordinate directly with general contractors, hitting sequenced deadlines between framing, mechanical rough-in, and paint.
Our in-house crews handle all three, and every job is covered by our license, insurance, and workmanship warranty.
Project Planning, Pricing, and Scheduling Factors
Accurate drywall pricing in Tye starts with measurable inputs: wall and ceiling square footage, board thickness, finish level, and how easily our crews can move materials into the space. Repair work follows a different path, since the cause of the damage determines how much material has to come out before new board goes in.
Square Footage, Ceiling Height, Access, and Material Quantities
Drywall installation in the Abilene area generally falls between $1.40 and $3.50 per square foot for hung, taped, and finished work, depending on scope and specification. Texas drywall and ceiling tile installers average $23.58 per hour according to BLS wage data, which anchors the labor portion of most bids.
A few measurements drive the material count:
Wall/ceiling square footage
Sets sheet count — a 4x12 board covers 48 sq ft
Ceiling height
9 ft and 10 ft walls often require 54-inch board or extra seams
Board type
5/8" Type X, moisture-resistant, and abuse-resistant cost more than standard 1/2"
Finish level
Level 4 is standard; Level 5 adds a skim coat and labor hours
Access
Second floors, tight stairwells, and occupied rooms add handling time
We measure on site rather than estimating from photos, so sheet counts, mud, tape, and fastener quantities reflect the actual room.
Why Repair Scope Depends on the Cause of Wall Damage
A doorknob hole and a water-stained ceiling look similar on an invoice line but are not the same job. Wall repair pricing tracks the underlying cause.
- Impact damage — patch, tape, texture match, and paint-ready finish; usually a same-day visit.
- Water damage — the source must be corrected first, then wet board and insulation are removed. Moisture readings guide how far we cut back.
- Foundation or framing movement — common with the expansive clay soils around Taylor County. Recurring corner cracks often need retaping and, in some cases, fastener correction.
- Nail pops and settling seams — refastening plus three coats of compound, with drying time between passes.
We identify the cause during the walkthrough and note it in the estimate, so you know whether you are buying a cosmetic patch or a structural-adjacent repair.
Comparing Detailed Estimates From Drywall Contractors
Bids from drywall contractors are only comparable when they list the same variables. Ask every company for the same line items before choosing.
Check that each estimate specifies:
- Finish level (Level 3, 4, or 5) and texture type — knockdown, orange peel, or smooth
- Board thickness and type by room
- Whether priming, painting, and debris haul-off are included
- Cleanup and dust control methods
- Warranty terms and license and insurance status
- Start date and working days on site
Scheduling matters as much as price on home improvements. Drying time between compound coats sets the minimum duration — most multi-room jobs run three to five working days, and Level 5 finishes add a day.
We provide written, itemized estimates, keep job sites contained, and hold to the dates we commit to with in-house crews rather than subcontracted labor.
Specialty Capabilities and Regional Provider Comparisons
Drywall work in Tye ranges from single-room patches to sound-rated commercial assemblies, and each type carries different material, labor, and inspection demands. Knowing which projects require acoustical expertise, when a general contractor should lead scheduling, and how area providers divide their services helps property owners select the right team the first time.
Acoustical Systems and Commercial Drywall Requirements
Commercial jobs near Tye and the Interstate 20 corridor frequently call for assemblies rated by STC (Sound Transmission Class) rather than standard 1/2" board.
Common specifications we work with include:
Standard partition
1/2" board, 3-5/8" steel stud, one side each
33–35
Insulated partition
Same with R-11 batt
38–40
Staggered stud
5/8" Type X both sides, insulation
45–50
Resilient channel
5/8" Type X, RC-1, insulation
50–55
Fire-rated corridors require 5/8" Type X board with taped joints on both faces. Suspended acoustical ceiling grid, soffits, and shaft wall liner panels round out the commercial scope, and firms such as Harris Acoustics Ltd specialize in this ceiling and sound-control category.
Our crews carry the professional tools and quality materials these assemblies demand, and every commercial partition we hang is backed by our warranty.
When to Coordinate With General Contractors
Drywall sits at a specific point in the construction sequence — after framing, rough electrical, plumbing, and HVAC pass inspection, and before paint and trim.
Coordinate through a general contractor when your project involves:
- Structural changes such as removing a load-bearing wall or altering roof framing
- Multiple trades running on overlapping schedules
- Permitted additions requiring city or county inspection sign-offs
- Insurance restoration after fire, storm, or water loss
For single-trade work — a ceiling repair, a garage conversion finish, a texture match — hiring a drywall company directly removes a markup layer and shortens the communication chain.
We work either way. On GC-led jobs we hold our scheduled window and keep the site clean for the next trade; on direct hires we handle the estimate, the timeline, and the walkthrough ourselves.
Notable Abilene-Area Companies and Service Categories
The Abilene market includes roughly 19 listed drywall contractors, and they tend to fall into distinct lanes.
- Multi-family and production builders — Unique Drywall covers insulation, hanging, tape and bed, and texture for apartment and tract work across Texas.
- Acoustical and ceiling specialists — Harris Acoustics Ltd focuses on grid ceilings and sound-rated systems.
- Residential and light commercial — Abilene Quality Drywall Inc and similar shops handle repairs, remodels, and new-home finishes.
- Painting crossovers — A.B Painting of Abilene lists drywall among its services.
Regional labor rates generally run $40 to $80 per hour, varying with finish level and access.
Our position spans residential and commercial work in Tye with in-house crews, transparent written estimates, and Level 5 finishes on request. We are fully licensed and insured, and we have been doing this for more than 20 years.
Frequently Asked Questions
Homeowners and business owners in Tye regularly ask about service scope, pricing ranges, drywall types suited to West Texas heat and low humidity, moisture-resistant board requirements, and project timelines. The answers below reflect how we approach drywall work across Taylor County, from single-patch repairs to full-house hangs and Level 5 finishes.
What drywall services are available for homes and businesses in Tye, Texas?
We handle the full drywall process: framing inspection, hanging, taping, bedding, finishing, texturing, and repair. That covers new construction, room additions, garage conversions, and remodels.
For commercial clients along US-80 and the I-20 corridor, we work on office buildouts, retail spaces, and metal-stud partition walls. Our in-house crews handle each phase, so the same team that hangs the board also finishes it.
Texture matching is a frequent request. Orange peel, knockdown, splatter, and hand-troweled finishes are all part of standard work, along with smooth Level 5 finishes for accent walls and areas with heavy natural light.
How much does drywall installation or repair typically cost in Tye, Texas?
Costs depend on square footage, ceiling height, finish level, and access. Small patch repairs — a doorknob hole or a nail pop — commonly fall in the $150 to $400 range for a service call.
Full installation, including hanging and finishing, generally runs $2.00 to $3.50 per square foot of board in the Abilene area. Level 5 finishes add roughly 15% to 30% over a standard Level 4 because of the skim coat required across the entire surface.
Ceilings, textured finishes, and second-story work carry higher labor costs than flat wall installations. We provide written, itemized estimates before any work starts so there are no adjustments mid-project.
Which drywall type is best for Tye's hot, semi-arid West Texas climate?
Standard 1/2-inch gypsum board works for most interior walls in Tye. The region averages about 24 inches of annual rainfall and summer highs frequently exceeding 95°F, so the primary concerns are thermal movement and dry-air shrinkage rather than persistent humidity.
For ceilings, we recommend 5/8-inch board or 1/2-inch sag-resistant panels, particularly on framing spaced 24 inches on center. Attic temperatures in West Texas can exceed 130°F in July, and thinner board is more prone to sagging under those conditions.
Garages and shared walls often call for 5/8-inch Type X fire-rated drywall, which is also required by code in specific assemblies.
Do bathrooms, kitchens, and laundry rooms in Tye require moisture-resistant drywall?
Yes, in wet or splash-prone areas. Moisture-resistant board — commonly called green board — is appropriate for bathroom walls outside the shower, laundry rooms, and areas behind kitchen sinks.
Inside tub and shower enclosures, cement board or a fiberglass-faced panel is the correct substrate for tile. Standard green board is not rated for direct water exposure behind tile.
Ventilation matters as much as board selection. A bathroom exhaust fan rated for the room's square footage reduces the moisture load that causes joint tape to lift and paint to blister.
How long does a typical drywall repair or new installation project take in the Tye and Abilene area?
Small repairs are usually completed in one visit, though drying time between compound coats often requires a return trip the following day.
A single-room patch with texture matching typically spans two days.
New installation in a 1,500 to 2,000 square foot home generally takes 5 to 8 working days from hang to final texture. That includes drying time for each of the three to four compound coats.
Level 5 finishes extend the schedule by one to two days for the skim coat and sanding. West Texas low humidity works in our favor here — joint compound cures faster than it does in more humid regions.
Can a local drywall contractor repair cracks, holes, water damage, and damaged texture finishes?
Yes. Common repairs include settlement cracks at door and window corners, ceiling stains from roof or plumbing leaks, and holes from furniture, doors, or plumbing access.
Water-damaged drywall requires cutting back to sound material and confirming the moisture source is resolved before new board goes in. Patching over wet gypsum leads to recurring stains and mold growth.
Texture matching on repairs takes practice — blending a 30-year-old knockdown finish into fresh compound is a different task than texturing a new wall. Our crews carry the tools and compounds for orange peel, knockdown, and hand-applied textures, and our work is backed by a written warranty.